Skip to content
Square Edge
Draft 0.1 · open for comment

The Square Edge Cut File Standard

A cut file should tell the cutter everything it needs and nothing it has to guess. This standard is free to use, copy and point your customers at. Square Edge checks files against it, and any cutter can publish their own variant.

1. Geometry

  • Every part is a closed outline. Gaps are closed within 0.001 in, or the file is fixed before it is sent.
  • No duplicate lines. A line drawn twice is cut twice.
  • Lines and true arcs only. Splines and ellipses are converted to arcs within tolerance before sending.
  • No slivers. Segments shorter than 0.005 in are rebuilt into their neighbours.
  • No stretched or mirrored blocks. Explode blocks with their exact transform. Mirror a part only when it is a declared left/right pair.
  • One part, one coordinate space. Parts from different files are never merged into one drawing.

2. Layers

Layer Holds Color (ACI)
CUT outer profiles 140
INSIDE CUT holes, slots, pass-throughs 92
MARKING lines: bend lines, landing lines 253
INFO text: part numbers, bend notes, labels 7
  • Every object is colored ByLayer. The layer carries the color, never the object.
  • Bend lines go on MARKING and are dashed. Their notes, for example UP 90° R0.188, go on INFO next to the line.
  • A cutter may use different layer names or colors. Their profile maps onto these four roles.

3. Units

  • The file header states its units ($INSUNITS: 1 for inch, 4 for millimeter).
  • The header and the part sizes agree. When they do not, the file is not sent until someone decides.
  • Units change only by the exact factor 25.4.

4. Labels

Every part carries, on INFO: the part number, thickness, material and quantity. Part numbers stay stable when a job is re-run.

5. Spacing and Small Features

Spacing and minimum feature sizes depend on the process and the thickness. Starting values, from public guidelines:

Process Part spacing Smallest hole
Laser 0.125 in 0.5 × thickness
Plasma 0.250 in 1.5 × thickness
Waterjet 0.125 in 0.5 × thickness, at least 0.060 in
CNC router 0.500 in 0.5 × thickness, at least 0.125 in

A cutter's own published values always win.

6. Proof

A file prepared to this standard can carry a Verified Report: each part's measurements and a fingerprint of its exact geometry. The cutter checks it for free, and any change to any part shows up.

This is draft 0.1. It will be revised with cutters before the 1.0 launch.