Skip to content
Square Edge

Help

The steps

  1. Load. Drop one or more DXF files: loose parts, whole nests, or both. Square Edge shows what each file holds before it changes anything: closed parts, plates found in nest files, units and the number of issues. Set thickness and material for every file, or per file.
  2. Check. Each shape is drawn to fit, with its issues numbered on the drawing and listed with their sizes.
  3. Fix. The fix closes gaps, removes duplicate lines and converts splines and ellipses to true arcs, within the profile tolerance. Every fix is measured against your source and logged. Anything over tolerance is left for you to decide. You can download the fixed DXF.
  4. Set Up. Identical parts are matched across every file, even when a copy is turned, so each part gets one number and a quantity. Mirror images stay separate parts. You can change any quantity.
  5. Nest. Choose the plate sizes you buy, any remnants you have, the spacing and the edge margin. Square Edge nests each thickness and material on its own plates, turns parts but never mirrors them, and can cut large unused plate off as a remnant (REM) to keep. When your files were a nest, it shows the plate you used before and the plate the new nest uses.
  6. Audit. Every part file is read back and compared with your source within 0.0001 in. Every sheet is read back too: each part on it must be an exact copy of its part file, inside the edge margin and clear of its neighbours by the spacing.
  7. Package. One zip: a DXF per part, a DXF per nested sheet, PDF previews of the parts and the sheets, a parts list and the Verified Report.
  8. Verify. Drop a Square Edge package to check it against its Verified Report.

Questions

Are my files uploaded? No. Square Edge runs in your browser. The site's security policy blocks uploads, and the engine never contacts a server with your file.

What does "within tolerance" mean? The profile's cleanup tolerance is 0.001 in by default. A fix may move geometry by no more than that, and each fix reports how far it actually moved things.

Why did it not fix everything? Anything over tolerance, and anything that would change a part's shape, is your call. Square Edge never stretches, scales or mirrors a part on its own.

What files can it read? DXF files from R12 to 2018, in inches or millimeters. A nest file is recognised by its plate outlines; if Square Edge takes a rectangle for a plate that is really a part, say so in Check and it is read as a part.

How is "plate used" worked out? Plate area minus any remnants kept for the rack. Weights use the thickness and a handbook density for the material named. The savings line appears only when every part in your old file sat on a plate and no quantity was changed, so the two nests hold the same parts.

Something looks wrong. During the beta, tell the person who invited you to the beta what you saw. Please do not send the file unless you choose to.