Skip to content
Square Edge

Guides

Draft

Layer Setup For Cut Files

A cutter reads layers to decide what each line is. Outer profiles are cut last, holes first, marking lines are etched or ignored, and text is read by a person. When everything sits on layer 0, someone has to sort it out by hand.

The four layers

Layer Holds
CUT outer profiles
INSIDE CUT holes, slots and pass-throughs
MARKING bend lines and landing lines
INFO part numbers, bend notes and labels

ByLayer, always

Set each object's color to ByLayer and let the layer carry the color. An object with its own color can look right on screen and still land on the wrong tool path at the cutter.

Bend lines

Bend lines are marking, not cuts. Put them on MARKING, dashed, with the note on INFO next to them, for example UP 90° R0.188. A bend line left on CUT gets cut straight through.

When your cutter uses other names

Many cutters publish their own layer names and colors. A Square Edge profile maps the four roles onto theirs, so you can keep one drawing habit for every shop.