Process profile
Router · built from public guidelines
Router · built from public guidelines
Generic CNC Router
Starting values for cnc router cutting, from public guidelines. Set your cutter's own requirements where they differ.
| Requirement | Value |
|---|---|
| Part spacing | 0.500 in |
| Smallest hole | 0.5 × thickness, and at least 0.125 in |
| Smallest slot width | 0.5 × thickness |
| Tiny segment limit | 0.005 in |
| Cleanup tolerance | 0.001 in |
| DXF version written | R12 |
| Lineweight | as drawn |
Sources
- https://sendcutsend.com/?p=5888 — CNC routed holes at least 0.125 in because of tool size
- https://toolstoday.com/learn/how-to-nest-in-vectric-vcarve-a-step-by-step-workflow — recommended nesting clearance about 0.50 in for a 1/4 in bit
- dxf_version R12: broad compatibility with router CAM; Square Edge starter value